Pneuma-Cel Product Details

Pneuma-Cel bladders are manufactured using high quality EPDM rubber with integrated fabric reinforcement for additional strength. Our newly designed pneumatic bladder clamps have been tested to 1,000,000 cycles (under normal conditions) with a standard operating pressure of 35 psi. Readily available clamp sizes are 6”, 8”, 9”, 12”, 18”, and 24” lengths. An air connector is supplied out one end with a standard ¼” OD polyurethane hose fitting and 1/8-27 NPT connector. Additional connector options include a 6mm OD hose with M8 connector and a ¼” direct connect hose fitting. Custom sizes are also available from 4-108” long.

Our new, low profile aluminum retainer allows for ease of installation for both the retainer and bladder clamp. The retainer comes with a hardware kit and pre-drilled holes (standard lengths only), so you can attach it to most T-slot framing systems. Once attached, all you need to do is slide the bladder into place and you’re ready to go.